Lime comes from limestone, it is quarried, crushed and heated in lime kilns to drive off carbon dioxide. This process converts the limestone in a highly alkaline (caustic) material called quick lime. When quick lime is slaked with water a lime putty is formed. High calcium lime putty will keep indefinitely in a sealed container …
In traditional high class work in buildings the walls of rooms are usually finished with a plaster cornice at the ceiling / wall junction and a timber skirting board at the floor to wall junction. As a specialist plastering contractor White Chapel Art Plaster are often called in to match the plaster cornice in rooms …
Matching Skirting Boards and other Timber Mouldings Read More »
A plain faced cast plaster ceiling (or wall) is formed from flat rectangular panels of fibrous plaster work. These panels are made with a perimeter rebate around their outer edge to enable flat scrimmed joints to be formed which will not crack or distort where adjacent panels abut one another. Panels are made to a …
Plasterers scrim is used to reinforce the body of a plasterers work to prevent cracking. Traditionally jute, canvas, hessian or flax were used made in differing widths depending upon requirements e.g.; restoration, jointing plasterboards or matching works. When plasterboards became popular thinner cotton scrim was used to joint boards as finishing coats were applied, this …
There have been many designs employed to enhance the appearance of building interiors using decorative plaster work. Period properties and high specification new builds will often have plaster cornice in their ceiling to wall intersections. In its simplest form, this may be a plaster coving but can also be more extensive ornamental work depending on …
When repairs and alterations are carried out in a traditional period house the internal finishes can be damaged. When decorative plaster work to ceilings and walls require repair or renewal with an identical match, a specialist plastering firm such as White Chapel Art Plaster are usually employed. In the image above we show a lump …
A plasterers cornice run in-situ was a traditional way of forming a decorative moulding, onsite, in a room at its ceiling to wall junction. Many Victorian properties will have in their rooms cornice of this type. A cornice run in-situ on the ceiling/wall could be formed in lime sand mortar, lime putty, or gauged setting …
Plaster Coving Manchester – Made in Manchester, the story of Manchester Art Plasterers. More than half a century ago whilst making his way home from school, a young Charlie Warren stopped to look in through the iron gates of an art plaster workshop. Situated under the arches adjacent to New Bailey street Salford, this was …
Plaster coving or plaster cove is a simple concave moulding. It is in the shape of part of an ellipse (Greek origin) or part of a circle (Roman origin). Plaster coving is usually used to finish the junction of a wall and ceiling at their intersection. Plaster coving can be fibrous plasterwork, cored out and …
Fibrous Plastering is a method or process used to produce decorative plasterwork on a bench in a workshop. The casts produced in the workshop are taken to site and put in place by fibrous plaster fixers. The three component parts of fibrous plaster casts are casting plaster, timber laths and canvas or hessian scrim. The …
